Packages changed: NetworkManager (1.36.0 -> 1.36.2) bash-completion bcm43xx-firmware busybox-links container-selinux (2.171.0 -> 2.180.0) dbus-1 dbus-1-x11 desktop-translations (84.87.20210517.b9a41955 -> 84.87.20220316.9301f89b) evince (41.3 -> 41.4) flatpak (1.12.6 -> 1.12.7) fwupd-efi (1.1 -> 1.2) git gnome-control-center gnome-software (41.4 -> 41.5) grep grub2 gstreamer-plugins-rs (0.8.1 -> 0.8.2) kernel-64kb (5.16.14 -> 5.16.15) kernel-source (5.16.14 -> 5.16.15) libepoxy (1.5.9 -> 1.5.10) libgnome-games-support1_3 libgnomesu (2.0.6 -> 2.0.7) libiscsi (1.19.0+git.20210930 -> 1.19.0+git.20220303) libnvme (1.0~6 -> 1.0~7) libreoffice librsvg (2.52.7 -> 2.52.8) libsigc++2 (2.10.7 -> 2.10.8) libstorage-ng (4.4.93 -> 4.4.94) mobile-broadband-provider-info (20210805 -> 20220315) nvme-cli (2.0~6 -> 2.0~7) openSUSE-build-key ovmf p11-kit (0.23.22 -> 0.24.1) protobuf python python-boto3 (1.21.0 -> 1.21.10) python-botocore (1.24.0 -> 1.24.10) python-pyudev rubygem-formatador (1.1.0 -> 0.3.0) suitesparse supermin texlive texlive-specs-n (2021.187.2.005svn58637 -> 2021.189.2.005svn58637) wavpack whois (5.5.11 -> 5.5.12) xdg-desktop-portal (1.12.1 -> 1.14.0) yast2-installation (4.4.48 -> 4.4.49) yast2-packager (4.4.23 -> 4.4.26) === Details === ==== NetworkManager ==== Version update (1.36.0 -> 1.36.2) Subpackages: NetworkManager-pppoe libnm0 typelib-1_0-NM-1_0 - Do not requires dhcp-client, NM is using its internal client by default for a long time now. - Convert iproute2 and iputils requires to recommends, they should not be hard requires. - Update to version 1.36.2: + When the list of plugins is not specified via "main.plugins" in NetworkManager.conf and no build-time default is set with "--with-config-plugins-default" configure argument, now all known plugins found in the plugin directory are loaded (and the built-in "keyfile" plugin is preferred over others). + Preserve external ports during checkpoint rollback. + Fix removal of ovsdb entry when an OVS interface goes away. + Fix DNS configuration for WWAN connections. ==== bash-completion ==== - remove PS1-completion-boo903362.patch as it breaks on non-bash shells and the original problem in bsc#903362#c9 does not occur anymore - add versioned dependency to bash versions that have the fix ==== bcm43xx-firmware ==== - Add required firmware file for Bluetooth module found on RPi Zero 2W (bsc#1197286) ==== busybox-links ==== Subpackages: busybox-coreutils busybox-findutils busybox-gawk busybox-grep busybox-gzip busybox-psmisc busybox-sed busybox-sendmail busybox-util-linux busybox-xz - replace copy from buildroot's gzip with a reimplementation that is not GPLv3 (jsc#PM-3301) ==== container-selinux ==== Version update (2.171.0 -> 2.180.0) - Update to version 2.180.0 * Allow container domains to read/write kvm_device_t * Update kublet mappings to inlcude /usr/local/* * Allow container domains to use container runtime tcp and udp sockets * Alow containers to use unix_stream_sockets leaked from container runtimes * Allow userdomains to execute conmon_exec_t and use it as an entrypoint * Allow conmon_exec_t as an entrypoint * Add container_use_devices boolean to allow containers to use any device * Add explicit range transition for conmon * Add missing dbus class declaration into container_runtime_run() * Remove lockdown allow rules * Remove k3s fcontexts * Allow container domains to be used by user roles - Changed source url to allow for download via source service ==== dbus-1 ==== Subpackages: libdbus-1-3 - Drop use of %{with libalternatives}, there's no such bcond defined and in many other places it's not optional anyway (boo#1197258) ==== dbus-1-x11 ==== - Use --with-x=auto to actually enable X11 integration (boo#1197258, workaround https://gitlab.freedesktop.org/dbus/dbus/-/merge_requests/263) ==== desktop-translations ==== Version update (84.87.20210517.b9a41955 -> 84.87.20220316.9301f89b) - Update to version 84.87.20220316.9301f89b: * Update strings from Leap 15.4. * Translated using Weblate (Catalan) * Translated using Weblate (Chinese (China) (zh_CN)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (Taiwan) (zh_TW)) * Translated using Weblate (Chinese (Taiwan)) * Translated using Weblate (Croatian) * Translated using Weblate (Czech) * Translated using Weblate (Dutch) * Translated using Weblate (Finnish) * Translated using Weblate (French) * Translated using Weblate (German) * Translated using Weblate (Hindi) * Translated using Weblate (Indonesian) * Translated using Weblate (Italian) * Translated using Weblate (Japanese) * Translated using Weblate (Kabyle) * Translated using Weblate (Lithuanian) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Russian) * Translated using Weblate (Slovak) * Translated using Weblate (Spanish) * Translated using Weblate (Turkish) * Translated using Weblate (Ukrainian) * Translated using Weblate (Vietnamese) - Update to version 84.87.20210202.7db31a52: * Update strings from Leap 15.3. * Translated using Weblate (Arabic) * Translated using Weblate (Catalan) * Translated using Weblate (Central Atlas Tamazight) * Translated using Weblate (Chinese (China)) * Translated using Weblate (English (United Kingdom)) * Translated using Weblate (Finnish) * Translated using Weblate (French) * Translated using Weblate (German) * Translated using Weblate (Greek) * Translated using Weblate (Indonesian) * Translated using Weblate (Italian) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese) * Translated using Weblate (Romanian) * Translated using Weblate (Russian) * Translated using Weblate (Slovak) * Translated using Weblate (Spanish) * Translated using Weblate (Swedish) * Added translation using Weblate (Central Atlas Tamazight) * Drop obsolete mimelnk files (boo#1062631). - Update to version 84.87.20200312.febbb097: * Add two TODO notes to generate_and_merge_pos.sh * Drop en_US (boo#1139962, bsc#1163437). * README.md: Document the process of update * Translated using Weblate (Belarusian) * Translated using Weblate (Catalan) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Czech) * Translated using Weblate (Danish) * Translated using Weblate (Dutch) * Translated using Weblate (Estonian) * Translated using Weblate (Finnish) * Translated using Weblate (German) * Translated using Weblate (Greek) * Translated using Weblate (Indonesian) * Translated using Weblate (Japanese) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Slovak) * Translated using Weblate (Spanish) * Translated using Weblate (Turkish) * Translated using Weblate (Vietnamese) * Update strings from Leap 15.2. - Update to version 84.87.20190924.7050555c: * Unfuzzy YaST groups translations * fix typo * Translated using Weblate (Japanese) * Translated using Weblate (Japanese) * Translated using Weblate (Japanese) * Translated using Weblate (German) - The following bug was referenced in SLE 15: * boo#1037823 - Update to version 84.87.20190923.8ea56c56: * Regenerate .po files after some more search-replace for YaST * Run update-po-files.sh after Leap 15.2 update * Update for Leap 15.2 (boo#1145197, bsc#1146886) * Translated using Weblate (Slovak) * Translated using Weblate (German) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (German) * Translated using Weblate (Slovak) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) * Translated using Weblate (German) * Translated using Weblate (Polish) * Translated using Weblate (Polish) * Translated using Weblate (Polish) * Translated using Weblate (Italian) * Translated using Weblate (German) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Drop "translation" from English to English * Remove Indonesian from en_US files * Translated using Weblate (German) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (Chinese (China)) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (German) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (Portuguese) * Translated using Weblate (German) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) * Translated using Weblate (French) * Translated using Weblate (French) * Translated using Weblate (French) * Translated using Weblate (Portuguese) * Translated using Weblate (Slovak) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Japanese) * Translated using Weblate (Dutch) * Update all po files * Translated using Weblate (German) * Translated using Weblate (Chinese (China)) * Update update-desktop-files-yast.po * Translated using Weblate (Turkish) * Translated using Weblate (Finnish) * Translated using Weblate (Finnish) * Translated using Weblate (Finnish) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Lao) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Occidental) * Added translation using Weblate (Occidental) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Catalan) * Translated using Weblate (Catalan) * Translated using Weblate (Slovak) * Translated using Weblate (Italian) * Translated using Weblate (Catalan) * Translated using Weblate (Slovak) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Catalan) * Translated using Weblate (Occidental) * Translated using Weblate (Finnish) * Translated using Weblate (Finnish) * Translated using Weblate (Finnish) * Translated using Weblate (Arabic) * Translated using Weblate (Occidental) * Translated using Weblate (Spanish) * Translated using Weblate (Slovak) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Japanese) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Catalan) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Arabic) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Japanese) * Added translation using Weblate (Occidental) * Translated using Weblate (Slovak) * Added translation using Weblate (Occidental) * Translated using Weblate (Slovak) - Update to version 84.87.20190508.853b49d2: * Translated using Weblate (Slovak) - Update to version 84.87.20190504.726deb37: * Translated using Weblate (Catalan) * Translated using Weblate (Czech) * Translated using Weblate (Finnish) * Translated using Weblate (Lithuanian) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Russian) * Translated using Weblate (Slovak) * update translations - Update to version 84.87.20190409.048e157e: * Translated using Weblate (Arabic) * Translated using Weblate (German) * Translated using Weblate (Italian) * Translated using Weblate (Polish) * Translated using Weblate (Slovak) * Translated using Weblate (Spanish) - Update to version 84.87.20190314.58da68e1: * Translated using Weblate (Catalan) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Czech) * Translated using Weblate (Danish) * Translated using Weblate (Dutch) * Translated using Weblate (Finnish) * Translated using Weblate (French) * Translated using Weblate (Galician) * Translated using Weblate (German) * Translated using Weblate (Korean) * Translated using Weblate (Lithuanian) * Translated using Weblate (Russian) * Translated using Weblate (Slovak) * Translated using Weblate (Spanish) - New language: kab. - Update to version 84.87.20190305.22ea2626: * Translated using Weblate (Catalan) * Translated using Weblate (Czech) * Translated using Weblate (Finnish) * Translated using Weblate (Galician) * Translated using Weblate (German) * Translated using Weblate (Japanese) * Translated using Weblate (Russian) * Translated using Weblate (Slovak) * Translated using Weblate (Spanish) - Update to version 84.87.20190131.bc9de591: * update desktop file data * adjust for 15.1 * Also translate X-SuSE-YaST-Keywords entries in .desktop files * Consistently use LF line ending * Run generation with new enabled keys * Translated using Weblate (Arabic) * Translated using Weblate (Catalan) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (Taiwan)) * Translated using Weblate (Czech) * Translated using Weblate (Danish) * Translated using Weblate (Dutch) * Translated using Weblate (Finnish) * Translated using Weblate (Galician) * Translated using Weblate (German) * Translated using Weblate (Indonesian) * Translated using Weblate (Italian) * Translated using Weblate (Japanese) * Translated using Weblate (Kabyle) * Translated using Weblate (Persian) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Romanian) * Translated using Weblate (Russian) * Translated using Weblate (Slovak) * Translated using Weblate (Spanish) * Translated using Weblate (Swedish) * Translated using Weblate (Turkish) * Update appstreamdata.po * Update mimeinfo.po - Update to version 84.87.20180507.9a26f9e2: * Translated using Weblate (Dutch) * Translated using Weblate (German) * Translated using Weblate (Greek) * Translated using Weblate (Hindi) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Slovak) - Update to version 84.87.20180423.2e342f3a: * Translated using Weblate (Chinese (China)) * Translated using Weblate (Italian) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Slovak) * Translated using Weblate (Spanish) - Update to version 84.87.20180416.e6c83e49: * Translated using Weblate (Arabic) * Translated using Weblate (Catalan) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (Taiwan)) * Translated using Weblate (Czech) * Translated using Weblate (Dutch) * Translated using Weblate (French) * Translated using Weblate (German) * Translated using Weblate (Hungarian) * Translated using Weblate (Italian) * Translated using Weblate (Japanese) * Translated using Weblate (Lithuanian) * Translated using Weblate (Polish) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Russian) * Translated using Weblate (Slovak) * Translated using Weblate (Spanish) * Translated using Weblate (Swedish) - Update to version 84.87.20180321.c5ff1117: * Merge polkitactions-freedesktop into polkitaction * install polkitaction with name used by polkit * Don't install unused appstream and mimeinfo files - Update to version 84.87.20180321.47fa9a4e: * Strip whitespace from xml extracted strings * Translated using Weblate (Arabic) * Translated using Weblate (Catalan) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (Taiwan)) * Translated using Weblate (Czech) * Translated using Weblate (Dutch) * Translated using Weblate (French) * Translated using Weblate (German) * Translated using Weblate (Hungarian) * Translated using Weblate (Italian) * Translated using Weblate (Japanese) * Translated using Weblate (Polish) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Russian) * Translated using Weblate (Swedish) - Update to version 84.87.20180319.d4e87748: * Translated using Weblate (Arabic) * Translated using Weblate (Catalan) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (Taiwan)) * Translated using Weblate (Czech) * Translated using Weblate (Dutch) * Translated using Weblate (French) * Translated using Weblate (German) * Translated using Weblate (Hungarian) * Translated using Weblate (Italian) * Translated using Weblate (Japanese) * Translated using Weblate (Korean) * Translated using Weblate (Polish) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Russian) * Translated using Weblate (Slovak) * Translated using Weblate (Spanish) * Translated using Weblate (Swedish) * Update with Leap 15 strings - Update to version 84.87.20180308.779a35a: * Revert "Translated using Weblate (English (United Kingdom))" (bsc#1084392) * Translated using Weblate (Spanish) * Translated using Weblate (Spanish) * Translated using Weblate (Catalan) * Translated using Weblate (Polish) * Translated using Weblate (Spanish) * Translated using Weblate (Spanish) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Catalan) * Translated using Weblate (Italian) * Translated using Weblate (Dutch) * Translated using Weblate (Spanish) * Translated using Weblate (Arabic) * Translated using Weblate (Arabic) * Translated using Weblate (Catalan) * Translated using Weblate (Czech) * Translated using Weblate (Finnish) * Translated using Weblate (Finnish) * Translated using Weblate (Italian) * Translated using Weblate (Czech) * Translated using Weblate (Hungarian) * Translated using Weblate (Spanish) * Translated using Weblate (French) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Korean) * Translated using Weblate (Chinese (Taiwan)) * Translated using Weblate (Chinese (Taiwan)) * Translated using Weblate (Japanese) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (French) * Translated using Weblate (French) * Translated using Weblate (French) * Translated using Weblate (French) * Translated using Weblate (French) * Translated using Weblate (French) * Translated using Weblate (French) * Translated using Weblate (Slovak) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Japanese) * Translated using Weblate (Japanese) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (German) - Update to version 84.87.20180301.7046b3d: * Update to 42.3 final * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (German) * Translated using Weblate (Swedish) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (French) * Translated using Weblate (Dutch) * Translated using Weblate (Galician) * Translated using Weblate (Greek) * Translated using Weblate (Danish) * Translated using Weblate (Czech) * Translated using Weblate (Dutch) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Dutch) * Translated using Weblate (Finnish) * Translated using Weblate (Czech) * Translated using Weblate (Italian) * Translated using Weblate (Italian) * Translated using Weblate (Japanese) * Translated using Weblate (Japanese) * Translated using Weblate (Finnish) * Translated using Weblate (Finnish) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Italian) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Kabyle) * Translated using Weblate (Italian) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Dutch) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Danish) * Translated using Weblate (Swedish) * Translated using Weblate (Serbian) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Swedish) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Russian) * Translated using Weblate (Russian) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Chinese (Taiwan)) * Translated using Weblate (Chinese (Taiwan)) * Translated using Weblate (Chinese (Taiwan)) * Translated using Weblate (Chinese (Taiwan)) * Translated using Weblate (Chinese (Taiwan)) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Chinese (Taiwan)) * Translated using Weblate (Chinese (Taiwan)) * Translated using Weblate (Korean) * Translated using Weblate (Polish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Dutch) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Dutch) * Translated using Weblate (Hungarian) * Translated using Weblate (Hungarian) * Translated using Weblate (Hungarian) * Translated using Weblate (Hungarian) * Translated using Weblate (Hungarian) * Translated using Weblate (Czech) * Translated using Weblate (Swedish) * Translated using Weblate (Swedish) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Swedish) * Translated using Weblate (Italian) * Translated using Weblate (Italian) * Translated using Weblate (Italian) * Translated using Weblate (Italian) * Translated using Weblate (Arabic) * Translated using Weblate (Arabic) * Translated using Weblate (Arabic) * Translated using Weblate (Arabic) * Translated using Weblate (Arabic) * Translated using Weblate (Korean) * Translated using Weblate (Korean) * Translated using Weblate (Korean) * Translated using Weblate (English (United Kingdom)) * Translated using Weblate (French) * Translated using Weblate (French) * Translated using Weblate (Italian) * Translated using Weblate (Korean) * Translated using Weblate (Korean) * Translated using Weblate (Korean) * Translated using Weblate (Italian) * Translated using Weblate (Japanese) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Polish) * Translated using Weblate (Polish) * Translated using Weblate (Korean) * Translated using Weblate (Korean) * Translated using Weblate (Spanish) * Translated using Weblate (Spanish) * Translated using Weblate (Spanish) * Translated using Weblate (Spanish) * Translated using Weblate (Spanish) * Translated using Weblate (Italian) * Translated using Weblate (French) * Translated using Weblate (French) * Translated using Weblate (Hungarian) * Translated using Weblate (Hungarian) * Translated using Weblate (Hungarian) * Translated using Weblate (Hungarian) * Translated using Weblate (Italian) * Translated using Weblate (Italian) * Translated using Weblate (Italian) * Translated using Weblate (Hungarian) * Translated using Weblate (Italian) * Translated using Weblate (Italian) * Translated using Weblate (Italian) * Translated using Weblate (Italian) * Translated using Weblate (Swedish) * Translated using Weblate (Russian) * Translated using Weblate (Russian) * Translated using Weblate (Russian) * Translated using Weblate (Spanish) * Translated using Weblate (Italian) * Translated using Weblate (Italian) * Translated using Weblate (Polish) * Translated using Weblate (Polish) * Translated using Weblate (Polish) * Translated using Weblate (Polish) * Translated using Weblate (Italian) * Translated using Weblate (Polish) * Translated using Weblate (Italian) * Translated using Weblate (Italian) * Translated using Weblate (Hungarian) * Translated using Weblate (Korean) * Translated using Weblate (Korean) * Translated using Weblate (Russian) * Translated using Weblate (Russian) * Translated using Weblate (Polish) * Translated using Weblate (Polish) * Translated using Weblate (Polish) * Translated using Weblate (Polish) * Translated using Weblate (Arabic) * Translated using Weblate (Polish) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Russian) * Translated using Weblate (Polish) * Translated using Weblate (Polish) * Translated using Weblate (Polish) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (Polish) * Translated using Weblate (Czech) * Translated using Weblate (Marathi) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Korean) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Korean) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (German) * Translated using Weblate (Danish) * Translated using Weblate (Czech) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (English (United States)) * Translated using Weblate (English (United States)) * Translated using Weblate (English (United States)) * Translated using Weblate (English (United States)) * Translated using Weblate (English (United States)) * Translated using Weblate (English (United States)) * Translated using Weblate (English (United States)) * Translated using Weblate (Arabic) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Arabic) * Translated using Weblate (Arabic) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (French) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (Taiwan)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Czech) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Chinese (China)) * Translated using Weblate (French) * Translated using Weblate (French) * Translated using Weblate (French) * Translated using Weblate (Czech) * Translated using Weblate (Hungarian) * Translated using Weblate (Hungarian) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (English (United States)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Hungarian) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Ukrainian) * Translated using Weblate (French) * Translated using Weblate (French) * Translated using Weblate (French) * Translated using Weblate (Hungarian) * Translated using Weblate (French) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Danish) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Zulu) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Danish) * Translated using Weblate (Russian) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Bulgarian) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Indonesian) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Arabic) * Translated using Weblate (Indonesian) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Korean) * Translated using Weblate (Korean) * Translated using Weblate (Korean) * Translated using Weblate (Korean) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Dutch) * Translated using Weblate (Chinese (China)) * Translated using Weblate (Estonian) * Translated using Weblate (Japanese) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Russian) * Translated using Weblate (German) * Update generate_and_merge_pos.sh * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (German) * Translated using Weblate (Russian) * Translated using Weblate (Czech) * Translated using Weblate (French) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Czech) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Indonesian) * Translated using Weblate (Danish) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Czech) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Czech) * Translated using Weblate (Spanish) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Slovak) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Lithuanian) * Translated using Weblate (Lithuanian) * Translated using Weblate (Lithuanian) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Catalan) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Slovak) * Translated using Weblate (Danish) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Slovak) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Danish) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Czech) * Translated using Weblate (Catalan) * Translated using Weblate (Persian) * Translated using Weblate (German) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) * Translated using Weblate (Portuguese (Brazil)) ==== evince ==== Version update (41.3 -> 41.4) Subpackages: evince-plugin-comicsdocument evince-plugin-djvudocument evince-plugin-dvidocument evince-plugin-pdfdocument evince-plugin-tiffdocument evince-plugin-xpsdocument libevdocument3-4 libevview3-3 nautilus-evince typelib-1_0-EvinceDocument-3_0 typelib-1_0-EvinceView-3_0 - Update to version 41.4: + shell: Fix crash when thumbnail extraction takes too long. + Updated translations. ==== flatpak ==== Version update (1.12.6 -> 1.12.7) Subpackages: libflatpak0 system-user-flatpak - Update to version 1.12.7: + allow networked access to X11 and PulseAudio services if that is configured, and the application has network access + Absolute paths in WAYLAND_DISPLAY now work + Allow apps that were built with Flatpak 1.13.x to export AppStream metadata in share/metainfo + Most commands now work if /var/lib/flatpak exists but /var/lib/flatpak/repo does not, and will automatically populate the repo directory if possible + Consistently pass relative subpaths to libostree, working around a bug in libostree < 2021.6 when used with GLib >= 2.71 + Fix some memory leaks in GVariant data processing ==== fwupd-efi ==== Version update (1.1 -> 1.2) - Update to version 1.2: * Release fwupd-efi 1.2 * meson: use stadard objcopy binary * meson: use find_program() to find the helper scripts we run * meson: using local copy ldscript when local copy crt0 be used for SBAT * sbat: clarify project URL * trivial: Ignore some markdown issues * Wait 5 seconds to reboot on errors * Port pre-commit clang-format, codespell, markdownlint from fwupd * trivial: fixup python errors by codacity/precommit * trivial: fixup markdown format * trivial: spelling errors * Sleep longer when no updates to process * README: fix typo and URL * trivial: post release version bump - Remove 0001-meson-using-local-copy-ldscript-when-local-copy-crt0.patch (merged upstream) ==== git ==== Subpackages: git-core git-cvs git-email git-gui git-svn git-web gitk perl-Git - fix deps for SLES 12 ==== gnome-control-center ==== Subpackages: gnome-control-center-color gnome-control-center-goa gnome-control-center-user-faces - Add gnome-control-center-reload-vpn-plugins.patch: network/connection-editor: always load all available VPN plugins (glgo#GNOME/gnome-control-center!1263). ==== gnome-software ==== Version update (41.4 -> 41.5) - Update to version 41.5: + Disable scroll-by-mouse-wheel on featured carousel. + Ensure details page shows app provided on command line. + Added several appstream-related fixes. + Updated translations. ==== grep ==== - Make profiling deterministic (bsc#1040589) ==== grub2 ==== Subpackages: grub2-arm64-efi grub2-snapper-plugin grub2-systemd-sleep-plugin - Fix duplicated insmod part_gpt lines in grub.cfg (bsc#1197186) * 0001-grub-probe-Deduplicate-probed-partmap-output.patch - Fix GCC 12 build failure (bsc#1196546) * 0001-mkimage-Fix-dangling-pointer-may-be-used-error.patch * 0002-Fix-Werror-array-bounds-array-subscript-0-is-outside.patch * 0003-reed_solomon-Fix-array-subscript-0-is-outside-array-.patch - Revised * grub2-btrfs-01-add-ability-to-boot-from-subvolumes.patch * 0002-ieee1275-powerpc-enables-device-mapper-discovery.patch ==== gstreamer-plugins-rs ==== Version update (0.8.1 -> 0.8.2) - Update to version 0.8.2: * Update Cargo.lock * ci: Use correct gstreamer-rs images template * deny: Remove num-rational override * dav1ddec: - Use `AtomicRefCell` instead of `Mutex` for the state - Fix compilation after some API changes - Release input frames that immediately caused a decoding error ==== kernel-64kb ==== Version update (5.16.14 -> 5.16.15) - Linux 5.16.15 (bsc#1012628). - arm64: dts: qcom: sm8350: Describe GCC dependency clocks (bsc#1012628). - arm64: dts: qcom: sm8350: Correct UFS symbol clocks (bsc#1012628). - HID: elo: Revert USB reference counting (bsc#1012628). - HID: hid-thrustmaster: fix OOB read in thrustmaster_interrupts (bsc#1012628). - ARM: boot: dts: bcm2711: Fix HVS register range (bsc#1012628). - clk: qcom: gdsc: Add support to update GDSC transition delay (bsc#1012628). - clk: qcom: dispcc: Update the transition delay for MDSS GDSC (bsc#1012628). - soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel (bsc#1012628). - HID: vivaldi: fix sysfs attributes leak (bsc#1012628). - HID: nintendo: check the return value of alloc_workqueue() (bsc#1012628). - arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias (bsc#1012628). - tipc: fix kernel panic when enabling bearer (bsc#1012628). - vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command (bsc#1012628). - vduse: Fix returning wrong type in vduse_domain_alloc_iova() (bsc#1012628). - net: phy: meson-gxl: fix interrupt handling in forced mode (bsc#1012628). - mISDN: Fix memory leak in dsp_pipeline_build() (bsc#1012628). - vhost: fix hung thread due to erroneous iotlb entries (bsc#1012628). - virtio-blk: Don't use MAX_DISCARD_SEGMENTS if max_discard_seg is zero (bsc#1012628). - virtio-blk: Remove BUG_ON() in virtio_queue_rq() (bsc#1012628). - vdpa: fix use-after-free on vp_vdpa_remove (bsc#1012628). - isdn: hfcpci: check the return value of dma_set_mask() in setup_hw() (bsc#1012628). - net: qlogic: check the return value of dma_alloc_coherent() in qed_vf_hw_prepare() (bsc#1012628). - esp: Fix BEET mode inter address family tunneling on GSO (bsc#1012628). - net: gro: move skb_gro_receive_list to udp_offload.c (bsc#1012628). - qed: return status of qed_iov_get_link (bsc#1012628). - smsc95xx: Ignore -ENODEV errors when device is unplugged (bsc#1012628). - gpiolib: acpi: Convert ACPI value of debounce to microseconds (bsc#1012628). - drm/i915/psr: Set "SF Partial Frame Enable" also on full update (bsc#1012628). - drm/sun4i: mixer: Fix P010 and P210 format numbers (bsc#1012628). - net: dsa: mt7530: fix incorrect test in mt753x_phylink_validate() (bsc#1012628). - ARM: dts: aspeed: Fix AST2600 quad spi group (bsc#1012628). - iavf: Fix handling of vlan strip virtual channel messages (bsc#1012628). - i40e: stop disabling VFs due to PF error responses (bsc#1012628). - ice: stop disabling VFs due to PF error responses (bsc#1012628). - ice: Fix error with handling of bonding MTU (bsc#1012628). - ice: Don't use GFP_KERNEL in atomic context (bsc#1012628). - ice: Fix curr_link_speed advertised speed (bsc#1012628). - ethernet: Fix error handling in xemaclite_of_probe (bsc#1012628). - tipc: fix incorrect order of state message data sanity check (bsc#1012628). - net: ethernet: ti: cpts: Handle error for clk_enable (bsc#1012628). - net: ethernet: lpc_eth: Handle error for clk_enable (bsc#1012628). - net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr (bsc#1012628). - ax25: Fix NULL pointer dereference in ax25_kill_by_device (bsc#1012628). - net/mlx5: Fix size field in bufferx_reg struct (bsc#1012628). - net/mlx5: Fix a race on command flush flow (bsc#1012628). - net/mlx5e: Lag, Only handle events from highest priority multipath entry (bsc#1012628). - net/mlx5e: SHAMPO, reduce TIR indication (bsc#1012628). - NFC: port100: fix use-after-free in port100_send_complete (bsc#1012628). - selftests: pmtu.sh: Kill tcpdump processes launched by subshell (bsc#1012628). - selftests: pmtu.sh: Kill nettest processes launched in subshell (bsc#1012628). - gpio: ts4900: Do not set DAT and OE together (bsc#1012628). - mm: gup: make fault_in_safe_writeable() use fixup_user_fault() (bsc#1012628). - gianfar: ethtool: Fix refcount leak in gfar_get_ts_info (bsc#1012628). - net: phy: DP83822: clear MISR2 register to disable interrupts (bsc#1012628). - sctp: fix kernel-infoleak for SCTP sockets (bsc#1012628). - net: arc_emac: Fix use after free in arc_mdio_probe() (bsc#1012628). - net: bcmgenet: Don't claim WOL when its not available (bsc#1012628). - net: phy: meson-gxl: improve link-up behavior (bsc#1012628). - selftests/bpf: Add test for bpf_timer overwriting crash (bsc#1012628). - swiotlb: fix info leak with DMA_FROM_DEVICE (bsc#1012628). - usb: dwc3: pci: add support for the Intel Raptor Lake-S (bsc#1012628). - pinctrl: tigerlake: Revert "Add Alder Lake-M ACPI ID" (bsc#1012628). - KVM: Fix lockdep false negative during host resume (bsc#1012628). - kvm: x86: Disable KVM_HC_CLOCK_PAIRING if tsc is in always catchup mode (bsc#1012628). - spi: rockchip: Fix error in getting num-cs property (bsc#1012628). - spi: rockchip: terminate dma transmission when slave abort (bsc#1012628). - drm/vc4: hdmi: Unregister codec device on unbind (bsc#1012628). - of/fdt: move elfcorehdr reservation early for crash dump kernel (bsc#1012628). - x86/kvm: Don't use pv tlb/ipi/sched_yield if on 1 vCPU (bsc#1012628). - drivers: hamradio: 6pack: fix UAF bug caused by mod_timer() (bsc#1012628). - net-sysfs: add check for netdevice being present to speed_show (bsc#1012628). - hwmon: (pmbus) Clear pmbus fault/warning bits after read (bsc#1012628). - nvme-tcp: send H2CData PDUs based on MAXH2CDATA (bsc#1012628). - PCI: Mark all AMD Navi10 and Navi14 GPU ATS as broken (bsc#1012628). - gpio: Return EPROBE_DEFER if gc->to_irq is NULL (bsc#1012628). - drm/amdgpu: bypass tiling flag check in virtual display case (v2) (bsc#1012628). - Revert "xen-netback: remove 'hotplug-status' once it has served its purpose" (bsc#1012628). - Revert "xen-netback: Check for hotplug-status existence before watching" (bsc#1012628). - ipv6: prevent a possible race condition with lifetimes (bsc#1012628). - tracing: Ensure trace buffer is at least 4096 bytes large (bsc#1012628). - tracing/osnoise: Make osnoise_main to sleep for microseconds (bsc#1012628). - tracing: Fix selftest config check for function graph start up test (bsc#1012628). - selftest/vm: fix map_fixed_noreplace test failure (bsc#1012628). - selftests/memfd: clean up mapping in mfd_fail_write (bsc#1012628). - ARM: Spectre-BHB: provide empty stub for non-config (bsc#1012628). - fuse: fix fileattr op failure (bsc#1012628). - fuse: fix pipe buffer lifetime for direct_io (bsc#1012628). - staging: rtl8723bs: Fix access-point mode deadlock (bsc#1012628). - staging: gdm724x: fix use after free in gdm_lte_rx() (bsc#1012628). - net: macb: Fix lost RX packet wakeup race in NAPI receive (bsc#1012628). - riscv: alternative only works on !XIP_KERNEL (bsc#1012628). - mmc: meson: Fix usage of meson_mmc_post_req() (bsc#1012628). - riscv: Fix auipc+jalr relocation range checks (bsc#1012628). - tracing/osnoise: Force quiescent states while tracing (bsc#1012628). - tracing/osnoise: Do not unregister events twice (bsc#1012628). - arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0 (bsc#1012628). - arm64: Ensure execute-only permissions are not allowed without EPAN (bsc#1012628). - arm64: kasan: fix include error in MTE functions (bsc#1012628). - swiotlb: rework "fix info leak with DMA_FROM_DEVICE" (bsc#1012628). - virtio: unexport virtio_finalize_features (bsc#1012628). - virtio: acknowledge all features before access (bsc#1012628). - net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE (bsc#1012628). - ARM: fix Thumb2 regression with Spectre BHB (bsc#1012628). - watch_queue: Fix filter limit check (bsc#1012628). - watch_queue, pipe: Free watchqueue state after clearing pipe ring (bsc#1012628). - watch_queue: Fix to release page in ->release() (bsc#1012628). - watch_queue: Fix to always request a pow-of-2 pipe ring size (bsc#1012628). - watch_queue: Fix the alloc bitmap size to reflect notes allocated (bsc#1012628). - watch_queue: Free the alloc bitmap when the watch_queue is torn down (bsc#1012628). - watch_queue: Fix lack of barrier/sync/lock between post and read (bsc#1012628). - watch_queue: Make comment about setting ->defunct more accurate (bsc#1012628). - x86/boot: Fix memremap of setup_indirect structures (bsc#1012628). - x86/boot: Add setup_indirect support in early_memremap_is_setup_data() (bsc#1012628). - x86/module: Fix the paravirt vs alternative order (bsc#1012628). - x86/sgx: Free backing memory after faulting the enclave page (bsc#1012628). - x86/traps: Mark do_int3() NOKPROBE_SYMBOL (bsc#1012628). - drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP (bsc#1012628). - perf parse: Fix event parser error for hybrid systems (bsc#1012628). - btrfs: make send work with concurrent block group relocation (bsc#1012628). - riscv: dts: k210: fix broken IRQs on hart1 (bsc#1012628). - vhost: allow batching hint without size (bsc#1012628). - commit 2bd8d63 - config: enable XFS_RT (bsc#1197190) - commit d8f0e40 - esp: Fix possible buffer overflow in ESP transformation (CVE-2022-0886 bsc#1197131). - commit f5ed8a3 ==== kernel-source ==== Version update (5.16.14 -> 5.16.15) - Linux 5.16.15 (bsc#1012628). - arm64: dts: qcom: sm8350: Describe GCC dependency clocks (bsc#1012628). - arm64: dts: qcom: sm8350: Correct UFS symbol clocks (bsc#1012628). - HID: elo: Revert USB reference counting (bsc#1012628). - HID: hid-thrustmaster: fix OOB read in thrustmaster_interrupts (bsc#1012628). - ARM: boot: dts: bcm2711: Fix HVS register range (bsc#1012628). - clk: qcom: gdsc: Add support to update GDSC transition delay (bsc#1012628). - clk: qcom: dispcc: Update the transition delay for MDSS GDSC (bsc#1012628). - soc: mediatek: mt8192-mmsys: Fix dither to dsi0 path's input sel (bsc#1012628). - HID: vivaldi: fix sysfs attributes leak (bsc#1012628). - HID: nintendo: check the return value of alloc_workqueue() (bsc#1012628). - arm64: dts: armada-3720-turris-mox: Add missing ethernet0 alias (bsc#1012628). - tipc: fix kernel panic when enabling bearer (bsc#1012628). - vdpa/mlx5: add validation for VIRTIO_NET_CTRL_MQ_VQ_PAIRS_SET command (bsc#1012628). - vduse: Fix returning wrong type in vduse_domain_alloc_iova() (bsc#1012628). - net: phy: meson-gxl: fix interrupt handling in forced mode (bsc#1012628). - mISDN: Fix memory leak in dsp_pipeline_build() (bsc#1012628). - vhost: fix hung thread due to erroneous iotlb entries (bsc#1012628). - virtio-blk: Don't use MAX_DISCARD_SEGMENTS if max_discard_seg is zero (bsc#1012628). - virtio-blk: Remove BUG_ON() in virtio_queue_rq() (bsc#1012628). - vdpa: fix use-after-free on vp_vdpa_remove (bsc#1012628). - isdn: hfcpci: check the return value of dma_set_mask() in setup_hw() (bsc#1012628). - net: qlogic: check the return value of dma_alloc_coherent() in qed_vf_hw_prepare() (bsc#1012628). - esp: Fix BEET mode inter address family tunneling on GSO (bsc#1012628). - net: gro: move skb_gro_receive_list to udp_offload.c (bsc#1012628). - qed: return status of qed_iov_get_link (bsc#1012628). - smsc95xx: Ignore -ENODEV errors when device is unplugged (bsc#1012628). - gpiolib: acpi: Convert ACPI value of debounce to microseconds (bsc#1012628). - drm/i915/psr: Set "SF Partial Frame Enable" also on full update (bsc#1012628). - drm/sun4i: mixer: Fix P010 and P210 format numbers (bsc#1012628). - net: dsa: mt7530: fix incorrect test in mt753x_phylink_validate() (bsc#1012628). - ARM: dts: aspeed: Fix AST2600 quad spi group (bsc#1012628). - iavf: Fix handling of vlan strip virtual channel messages (bsc#1012628). - i40e: stop disabling VFs due to PF error responses (bsc#1012628). - ice: stop disabling VFs due to PF error responses (bsc#1012628). - ice: Fix error with handling of bonding MTU (bsc#1012628). - ice: Don't use GFP_KERNEL in atomic context (bsc#1012628). - ice: Fix curr_link_speed advertised speed (bsc#1012628). - ethernet: Fix error handling in xemaclite_of_probe (bsc#1012628). - tipc: fix incorrect order of state message data sanity check (bsc#1012628). - net: ethernet: ti: cpts: Handle error for clk_enable (bsc#1012628). - net: ethernet: lpc_eth: Handle error for clk_enable (bsc#1012628). - net: marvell: prestera: Add missing of_node_put() in prestera_switch_set_base_mac_addr (bsc#1012628). - ax25: Fix NULL pointer dereference in ax25_kill_by_device (bsc#1012628). - net/mlx5: Fix size field in bufferx_reg struct (bsc#1012628). - net/mlx5: Fix a race on command flush flow (bsc#1012628). - net/mlx5e: Lag, Only handle events from highest priority multipath entry (bsc#1012628). - net/mlx5e: SHAMPO, reduce TIR indication (bsc#1012628). - NFC: port100: fix use-after-free in port100_send_complete (bsc#1012628). - selftests: pmtu.sh: Kill tcpdump processes launched by subshell (bsc#1012628). - selftests: pmtu.sh: Kill nettest processes launched in subshell (bsc#1012628). - gpio: ts4900: Do not set DAT and OE together (bsc#1012628). - mm: gup: make fault_in_safe_writeable() use fixup_user_fault() (bsc#1012628). - gianfar: ethtool: Fix refcount leak in gfar_get_ts_info (bsc#1012628). - net: phy: DP83822: clear MISR2 register to disable interrupts (bsc#1012628). - sctp: fix kernel-infoleak for SCTP sockets (bsc#1012628). - net: arc_emac: Fix use after free in arc_mdio_probe() (bsc#1012628). - net: bcmgenet: Don't claim WOL when its not available (bsc#1012628). - net: phy: meson-gxl: improve link-up behavior (bsc#1012628). - selftests/bpf: Add test for bpf_timer overwriting crash (bsc#1012628). - swiotlb: fix info leak with DMA_FROM_DEVICE (bsc#1012628). - usb: dwc3: pci: add support for the Intel Raptor Lake-S (bsc#1012628). - pinctrl: tigerlake: Revert "Add Alder Lake-M ACPI ID" (bsc#1012628). - KVM: Fix lockdep false negative during host resume (bsc#1012628). - kvm: x86: Disable KVM_HC_CLOCK_PAIRING if tsc is in always catchup mode (bsc#1012628). - spi: rockchip: Fix error in getting num-cs property (bsc#1012628). - spi: rockchip: terminate dma transmission when slave abort (bsc#1012628). - drm/vc4: hdmi: Unregister codec device on unbind (bsc#1012628). - of/fdt: move elfcorehdr reservation early for crash dump kernel (bsc#1012628). - x86/kvm: Don't use pv tlb/ipi/sched_yield if on 1 vCPU (bsc#1012628). - drivers: hamradio: 6pack: fix UAF bug caused by mod_timer() (bsc#1012628). - net-sysfs: add check for netdevice being present to speed_show (bsc#1012628). - hwmon: (pmbus) Clear pmbus fault/warning bits after read (bsc#1012628). - nvme-tcp: send H2CData PDUs based on MAXH2CDATA (bsc#1012628). - PCI: Mark all AMD Navi10 and Navi14 GPU ATS as broken (bsc#1012628). - gpio: Return EPROBE_DEFER if gc->to_irq is NULL (bsc#1012628). - drm/amdgpu: bypass tiling flag check in virtual display case (v2) (bsc#1012628). - Revert "xen-netback: remove 'hotplug-status' once it has served its purpose" (bsc#1012628). - Revert "xen-netback: Check for hotplug-status existence before watching" (bsc#1012628). - ipv6: prevent a possible race condition with lifetimes (bsc#1012628). - tracing: Ensure trace buffer is at least 4096 bytes large (bsc#1012628). - tracing/osnoise: Make osnoise_main to sleep for microseconds (bsc#1012628). - tracing: Fix selftest config check for function graph start up test (bsc#1012628). - selftest/vm: fix map_fixed_noreplace test failure (bsc#1012628). - selftests/memfd: clean up mapping in mfd_fail_write (bsc#1012628). - ARM: Spectre-BHB: provide empty stub for non-config (bsc#1012628). - fuse: fix fileattr op failure (bsc#1012628). - fuse: fix pipe buffer lifetime for direct_io (bsc#1012628). - staging: rtl8723bs: Fix access-point mode deadlock (bsc#1012628). - staging: gdm724x: fix use after free in gdm_lte_rx() (bsc#1012628). - net: macb: Fix lost RX packet wakeup race in NAPI receive (bsc#1012628). - riscv: alternative only works on !XIP_KERNEL (bsc#1012628). - mmc: meson: Fix usage of meson_mmc_post_req() (bsc#1012628). - riscv: Fix auipc+jalr relocation range checks (bsc#1012628). - tracing/osnoise: Force quiescent states while tracing (bsc#1012628). - tracing/osnoise: Do not unregister events twice (bsc#1012628). - arm64: dts: marvell: armada-37xx: Remap IO space to bus address 0x0 (bsc#1012628). - arm64: Ensure execute-only permissions are not allowed without EPAN (bsc#1012628). - arm64: kasan: fix include error in MTE functions (bsc#1012628). - swiotlb: rework "fix info leak with DMA_FROM_DEVICE" (bsc#1012628). - virtio: unexport virtio_finalize_features (bsc#1012628). - virtio: acknowledge all features before access (bsc#1012628). - net/mlx5: Fix offloading with ESWITCH_IPV4_TTL_MODIFY_ENABLE (bsc#1012628). - ARM: fix Thumb2 regression with Spectre BHB (bsc#1012628). - watch_queue: Fix filter limit check (bsc#1012628). - watch_queue, pipe: Free watchqueue state after clearing pipe ring (bsc#1012628). - watch_queue: Fix to release page in ->release() (bsc#1012628). - watch_queue: Fix to always request a pow-of-2 pipe ring size (bsc#1012628). - watch_queue: Fix the alloc bitmap size to reflect notes allocated (bsc#1012628). - watch_queue: Free the alloc bitmap when the watch_queue is torn down (bsc#1012628). - watch_queue: Fix lack of barrier/sync/lock between post and read (bsc#1012628). - watch_queue: Make comment about setting ->defunct more accurate (bsc#1012628). - x86/boot: Fix memremap of setup_indirect structures (bsc#1012628). - x86/boot: Add setup_indirect support in early_memremap_is_setup_data() (bsc#1012628). - x86/module: Fix the paravirt vs alternative order (bsc#1012628). - x86/sgx: Free backing memory after faulting the enclave page (bsc#1012628). - x86/traps: Mark do_int3() NOKPROBE_SYMBOL (bsc#1012628). - drm/panel: Select DRM_DP_HELPER for DRM_PANEL_EDP (bsc#1012628). - perf parse: Fix event parser error for hybrid systems (bsc#1012628). - btrfs: make send work with concurrent block group relocation (bsc#1012628). - riscv: dts: k210: fix broken IRQs on hart1 (bsc#1012628). - vhost: allow batching hint without size (bsc#1012628). - commit 2bd8d63 - config: enable XFS_RT (bsc#1197190) - commit d8f0e40 - esp: Fix possible buffer overflow in ESP transformation (CVE-2022-0886 bsc#1197131). - commit f5ed8a3 ==== libepoxy ==== Version update (1.5.9 -> 1.5.10) - Update to version 1.5.10: + Fix for building with MSVC on non-English locale. + Fix build on Android. + Add the right include paths for EGL and X11 headers. - Upstream tarball url changed, probably by mistake, so leave old url in place, but disabled. ==== libgnome-games-support1_3 ==== - Initial compat package libgnome-games-support1_3. ==== libgnomesu ==== Version update (2.0.6 -> 2.0.7) Subpackages: libgnomesu0 - Update to version 2.0.7: * Updated translations. * Better wording in the documentation. ==== libiscsi ==== Version update (1.19.0+git.20210930 -> 1.19.0+git.20220303) - Update to version 1.19.0+git.20220303: * iscsi-command: Fix leak in iscsi_send_data_out * iscsi-pr: add persistent reservation tool * add iscsi_force_reconnect() * add libiscsi.syms to .gitignore ==== libnvme ==== Version update (1.0~6 -> 1.0~7) - Update to version 1.0-rc7: * linux: fixup log page offset in nvme_get_log_page() * tree: Add support for default trsvcid for all controllers (bsc#1195858) * tree: fixup coredump during nvme discover ==== libreoffice ==== Subpackages: libreoffice-base libreoffice-calc libreoffice-draw libreoffice-filters-optional libreoffice-gnome libreoffice-gtk3 libreoffice-icon-themes libreoffice-impress libreoffice-l10n-en libreoffice-mailmerge libreoffice-math libreoffice-pyuno libreoffice-qt5 libreoffice-writer libreofficekit - Update gpgme minimum version - Only use curl tarball when needed - Remove wrong comment ==== librsvg ==== Version update (2.52.7 -> 2.52.8) Subpackages: gdk-pixbuf-loader-rsvg librsvg-2-2 rsvg-thumbnailer typelib-1_0-Rsvg-2_0 - Update to version 2.52.8: + Catch circular references when rendering patterns (glgo#GNOME/librsvg#721). ==== libsigc++2 ==== Version update (2.10.7 -> 2.10.8) - Update to version 2.10.8: + Build: - Meson build: Perl is not required by new versions of mm-common - NMake Makefiles: Support building with VS2022 + Documentation: Upgrade the manual from DocBook 4.1 to DocBook 5.0 ==== libstorage-ng ==== Version update (4.4.93 -> 4.4.94) Subpackages: libstorage-ng-lang libstorage-ng-ruby libstorage-ng1 - merge gh#openSUSE/libstorage-ng#863 - do not run blkdiscard on extended partitions (bsc#1197257) - 4.4.94 ==== mobile-broadband-provider-info ==== Version update (20210805 -> 20220315) - Update to version 20220315: * release: bump version to 20220315 * doap: remove Jiri * doap: add myself * us: include information for voicemail for Verizon Wireless * dtd: expand DTD to include information for vvm3 Visual Voicemail standard * us: add Purism SPC AweSIM MVNO * us: added MCCMNC 310280 to AT&T * ro: update the Romania Orange net and mms credentials * eg: mms settings for vodafone.eg * de: add mms information to combined apn * us: added Ting provider information * us: add US Mobile (T-Mobile MVNO): mcc="310" mnc="260" * au: remove duplicate Telstra MMS entry * bd: updated profile names and other information * bd: remove defunct provider * se: remove defunct operators * fr: add AIF Mvno provider * it: add Rabona Mobile * us: move mobilenet APN to T-Mobile and add mmsc * us: add Mint Mobile VVM, APN, and MMSC * ca: update Fido APN settings * us: add MMS settings to T-Mobile LTE APN * us: add T-Mobile to LTE APN name * fr: add TeleCoop * dtd: fix a spelling error * jp: add Japanese providers * cl: update apn of main providers of Chile * ca: change Wind Mobile to Freedom Mobile * ca: add Public Mobile provider * Rename Orange (Israel) to Partner * Add APN information for We4G (Israel) * Adds the missing MMSC and MMS proxy for Orange France into serviceproviders.xml * il: Add Golan Telecom and Hot Mobile MMS settings * Update redirected GNOME wiki URL in CONTRIBUTING - Drop mobile-broadband-provider-info-tmobile-reorder.patch: Having this patch downstream for ages makes no sense, and if it was really needed, one would think it had landed as a bug upstream at some point. ==== nvme-cli ==== Version update (2.0~6 -> 2.0~7) Subpackages: nvme-cli-bash-completion nvme-cli-zsh-completion - Update to version 2.0-rc7: * netapp-nvme: fix smdevices segfault in json output (bsc#1195937) * fabrics: keep the backward compatibility * nvme: Do not slash escape strings in JSON output (bsc#1195937) * nvme: Print full device path * nvme-print: Make JSON keys consistent with nvme-cli 1.x * nvme-print: print generic device in list command * fabrics: check for discovery controller instead of subsystem NQN (bsc#1197061) * connect: Set errno to zero on nvmf_add_ctrl() success * documenation updates - Set path to systemctl via newly introduced config option - Update 0100-harden_nvmf-connect@.service.patch due to upstream file rename - Moved bash completion script to /usr/share/bash-completion/completions/nvme ==== openSUSE-build-key ==== - gpg-pubkey-307e3d54-5aaa90a5.asc: remove the RSA 1024bit SLE11 key and try to remove it from installed systems via Obsoletes. ==== ovmf ==== Subpackages: qemu-uefi-aarch64 - TPM_ENABLE got renamed to TPM2_ENABLE and TPM_CONFIG_ENABLE removed (except on ARM for some reason) (boo#1197104) ==== p11-kit ==== Version update (0.23.22 -> 0.24.1) Subpackages: libp11-kit0 p11-kit-tools - make sure p11-kit components have matching versions (boo#1196812) - Update to version 0.24.1: * rpc: Support protocol version negotiation. * proxy: Support copying attribute array recursively. * Link libp11-kit so that it cannot unload. * Translation improvements. * Build fixes. - Update to version 0.24.0: * Use inclusive language on certificate distrust. Note: This changes the directory and attribute names to distrust certain CAs to "blocklist". * Fix issues spotted by coverity and ASan. * Integrate gettext with tools more tightly. * rpc: Forbid use of array of attributes. * Build fixes. - Change dirs from blacklist to blocklist ref upstream changes. ==== protobuf ==== Subpackages: libprotobuf-lite30 libprotobuf30 - Change Requires: zlib-devel to pkgconfig(zlib) so as not to conflict with libz-ng-compat1. ==== python ==== - python-2.7.9-sles-disable-verification-by-default.patch: remove as it by default now always does strict enforcement anyway and it is 2022. ==== python-boto3 ==== Version update (1.21.0 -> 1.21.10) - Update to version 1.21.10 * api-change:``mediapackage``: [``botocore``] This release adds Hybridcast as an available profile option for Dash Origin Endpoints. * api-change:``rds``: [``botocore``] Documentation updates for Multi-AZ DB clusters. * api-change:``mgn``: [``botocore``] Add support for GP3 and IO2 volume types. Add bootMode to LaunchConfiguration object (and as a parameter to UpdateLaunchConfigurationRequest). * api-change:``kafkaconnect``: [``botocore``] Adds operation for custom plugin deletion (DeleteCustomPlugin) and adds new StateDescription field to DescribeCustomPlugin and DescribeConnector responses to return errors from asynchronous resource creation. - from version 1.21.9 * api-change:``finspace-data``: [``botocore``] Add new APIs for managing Users and Permission Groups. * api-change:``amplify``: [``botocore``] Add repositoryCloneMethod field for hosting an Amplify app. This field shows what authorization method is used to clone the repo: SSH, TOKEN, or SIGV4. * api-change:``fsx``: [``botocore``] This release adds support for the following FSx for OpenZFS features: snapshot lifecycle transition messages, force flag for deleting file systems with child resources, LZ4 data compression, custom record sizes, and unsetting volume quotas and reservations. * api-change:``fis``: [``botocore``] This release adds logging support for AWS Fault Injection Simulator experiments. Experiment templates can now be configured to send experiment activity logs to Amazon CloudWatch Logs or to an S3 bucket. * api-change:``route53-recovery-cluster``: [``botocore``] This release adds a new API option to enable overriding safety rules to allow routing control state updates. * api-change:``amplifyuibuilder``: [``botocore``] We are adding the ability to configure workflows and actions for components. * api-change:``athena``: [``botocore``] This release adds support for updating an existing named query. * api-change:``ec2``: [``botocore``] This release adds support for new AMI property 'lastLaunchedTime' * api-change:``servicecatalog-appregistry``: [``botocore``] AppRegistry is deprecating Application and Attribute-Group Name update feature. In this release, we are marking the name attributes for Update APIs as deprecated to give a heads up to our customers. - from version 1.21.8 * api-change:``elasticache``: [``botocore``] Doc only update for ElastiCache * api-change:``panorama``: [``botocore``] Added NTP server configuration parameter to ProvisionDevice operation. Added alternate software fields to DescribeDevice response - from version 1.21.7 * api-change:``route53``: [``botocore``] SDK doc update for Route 53 to update some parameters with new information. * api-change:``databrew``: [``botocore``] This AWS Glue Databrew release adds feature to merge job outputs into a max number of files for S3 File output type. * api-change:``transfer``: [``botocore``] Support automatic pagination when listing AWS Transfer Family resources. * api-change:``s3control``: [``botocore``] Amazon S3 Batch Operations adds support for new integrity checking capabilities in Amazon S3. * api-change:``s3``: [``botocore``] This release adds support for new integrity checking capabilities in Amazon S3. You can choose from four supported checksum algorithms for data integrity checking on your upload and download requests. In addition, AWS SDK can automatically calculate a checksum as it streams data into S3 * api-change:``fms``: [``botocore``] AWS Firewall Manager now supports the configuration of AWS Network Firewall policies with either centralized or distributed deployment models. This release also adds support for custom endpoint configuration, where you can choose which Availability Zones to create firewall endpoints in. * api-change:``lightsail``: [``botocore``] This release adds support to delete and create Lightsail default key pairs that you can use with Lightsail instances. * api-change:``autoscaling``: [``botocore``] You can now hibernate instances in a warm pool to stop instances without deleting their RAM contents. You can now also return instances to the warm pool on scale in, instead of always terminating capacity that you will need later. - from version 1.21.6 * api-change:``transfer``: [``botocore``] The file input selection feature provides the ability to use either the originally uploaded file or the output file from the previous workflow step, enabling customers to make multiple copies of the original file while keeping the source file intact for file archival. * api-change:``lambda``: [``botocore``] Lambda releases .NET 6 managed runtime to be available in all commercial regions. * api-change:``textract``: [``botocore``] Added support for merged cells and column header for table response. - from version 1.21.5 * api-change:``translate``: [``botocore``] This release enables customers to use translation settings for formality customization in their synchronous translation output. * api-change:``wafv2``: [``botocore``] Updated descriptions for logging configuration. * api-change:``apprunner``: [``botocore``] AWS App Runner adds a Java platform (Corretto 8, Corretto 11 runtimes) and a Node.js 14 runtime. - from version 1.21.4 * api-change:``imagebuilder``: [``botocore``] This release adds support to enable faster launching for Windows AMIs created by EC2 Image Builder. * api-change:``customer-profiles``: [``botocore``] This release introduces apis CreateIntegrationWorkflow, DeleteWorkflow, ListWorkflows, GetWorkflow and GetWorkflowSteps. These apis are used to manage and view integration workflows. * api-change:``dynamodb``: [``botocore``] DynamoDB ExecuteStatement API now supports Limit as a request parameter to specify the maximum number of items to evaluate. If specified, the service will process up to the Limit and the results will include a LastEvaluatedKey value to continue the read in a subsequent operation. - from version 1.21.3 * api-change:``transfer``: [``botocore``] Properties for Transfer Family used with SFTP, FTP, and FTPS protocols. Display Banners are bodies of text that can be displayed before and/or after a user authenticates onto a server using one of the previously mentioned protocols. * api-change:``gamelift``: [``botocore``] Increase string list limit from 10 to 100. * api-change:``budgets``: [``botocore``] This change introduces DescribeBudgetNotificationsForAccount API which returns budget notifications for the specified account - from version 1.21.2 * api-change:``iam``: [``botocore``] Documentation updates for AWS Identity and Access Management (IAM). * api-change:``redshift``: [``botocore``] SDK release for Cross region datasharing and cost-control for cross region datasharing * api-change:``evidently``: [``botocore``] Add support for filtering list of experiments and launches by status * api-change:``backup``: [``botocore``] AWS Backup add new S3_BACKUP_OBJECT_FAILED and S3_RESTORE_OBJECT_FAILED event types in BackupVaultNotifications events list. - from version 1.21.1 * api-change:``ec2``: [``botocore``] Documentation updates for EC2. * api-change:``budgets``: [``botocore``] Adds support for auto-adjusting budgets, a new budget method alongside fixed and planned. Auto-adjusting budgets introduces new metadata to configure a budget limit baseline using a historical lookback average or current period forecast. * api-change:``ce``: [``botocore``] AWS Cost Anomaly Detection now supports SNS FIFO topic subscribers. * api-change:``glue``: [``botocore``] Support for optimistic locking in UpdateTable * api-change:``ssm``: [``botocore``] Assorted ticket fixes and updates for AWS Systems Manager. - Update BuildRequires and Requires from setup.py - actually does not require python-mock for build ==== python-botocore ==== Version update (1.24.0 -> 1.24.10) - Version update to 1.24.10 * api-change:``mediapackage``: This release adds Hybridcast as an available profile option for Dash Origin Endpoints. * api-change:``rds``: Documentation updates for Multi-AZ DB clusters. * api-change:``mgn``: Add support for GP3 and IO2 volume types. Add bootMode to LaunchConfiguration object (and as a parameter to UpdateLaunchConfigurationRequest). * api-change:``kafkaconnect``: Adds operation for custom plugin deletion (DeleteCustomPlugin) and adds new StateDescription field to DescribeCustomPlugin and DescribeConnector responses to return errors from asynchronous resource creation. - from version 1.24.9 * api-change:``finspace-data``: Add new APIs for managing Users and Permission Groups. * api-change:``amplify``: Add repositoryCloneMethod field for hosting an Amplify app. This field shows what authorization method is used to clone the repo: SSH, TOKEN, or SIGV4. * api-change:``fsx``: This release adds support for the following FSx for OpenZFS features: snapshot lifecycle transition messages, force flag for deleting file systems with child resources, LZ4 data compression, custom record sizes, and unsetting volume quotas and reservations. * api-change:``fis``: This release adds logging support for AWS Fault Injection Simulator experiments. Experiment templates can now be configured to send experiment activity logs to Amazon CloudWatch Logs or to an S3 bucket. * api-change:``route53-recovery-cluster``: This release adds a new API option to enable overriding safety rules to allow routing control state updates. * api-change:``amplifyuibuilder``: We are adding the ability to configure workflows and actions for components. * api-change:``athena``: This release adds support for updating an existing named query. * api-change:``ec2``: This release adds support for new AMI property 'lastLaunchedTime' * api-change:``servicecatalog-appregistry``: AppRegistry is deprecating Application and Attribute-Group Name update feature. In this release, we are marking the name attributes for Update APIs as deprecated to give a heads up to our customers. - from version 1.24.8 * api-change:``elasticache``: Doc only update for ElastiCache * api-change:``panorama``: Added NTP server configuration parameter to ProvisionDevice operation. Added alternate software fields to DescribeDevice response - from version 1.24.7 * api-change:``route53``: SDK doc update for Route 53 to update some parameters with new information. * api-change:``databrew``: This AWS Glue Databrew release adds feature to merge job outputs into a max number of files for S3 File output type. * api-change:``transfer``: Support automatic pagination when listing AWS Transfer Family resources. * api-change:``s3control``: Amazon S3 Batch Operations adds support for new integrity checking capabilities in Amazon S3. * api-change:``s3``: This release adds support for new integrity checking capabilities in Amazon S3. You can choose from four supported checksum algorithms for data integrity checking on your upload and download requests. In addition, AWS SDK can automatically calculate a checksum as it streams data into S3 * api-change:``fms``: AWS Firewall Manager now supports the configuration of AWS Network Firewall policies with either centralized or distributed deployment models. This release also adds support for custom endpoint configuration, where you can choose which Availability Zones to create firewall endpoints in. * api-change:``lightsail``: This release adds support to delete and create Lightsail default key pairs that you can use with Lightsail instances. * api-change:``autoscaling``: You can now hibernate instances in a warm pool to stop instances without deleting their RAM contents. You can now also return instances to the warm pool on scale in, instead of always terminating capacity that you will need later. - from version 1.24.6 * api-change:``transfer``: The file input selection feature provides the ability to use either the originally uploaded file or the output file from the previous workflow step, enabling customers to make multiple copies of the original file while keeping the source file intact for file archival. * api-change:``lambda``: Lambda releases .NET 6 managed runtime to be available in all commercial regions. * api-change:``textract``: Added support for merged cells and column header for table response. - from version 1.24.5 * api-change:``translate``: This release enables customers to use translation settings for formality customization in their synchronous translation output. * api-change:``wafv2``: Updated descriptions for logging configuration. * api-change:``apprunner``: AWS App Runner adds a Java platform (Corretto 8, Corretto 11 runtimes) and a Node.js 14 runtime. - from version 1.24.4 * api-change:``imagebuilder``: This release adds support to enable faster launching for Windows AMIs created by EC2 Image Builder. * api-change:``customer-profiles``: This release introduces apis CreateIntegrationWorkflow, DeleteWorkflow, ListWorkflows, GetWorkflow and GetWorkflowSteps. These apis are used to manage and view integration workflows. * api-change:``dynamodb``: DynamoDB ExecuteStatement API now supports Limit as a request parameter to specify the maximum number of items to evaluate. If specified, the service will process up to the Limit and the results will include a LastEvaluatedKey value to continue the read in a subsequent operation. - from version 1.24.3 * api-change:``transfer``: Properties for Transfer Family used with SFTP, FTP, and FTPS protocols. Display Banners are bodies of text that can be displayed before and/or after a user authenticates onto a server using one of the previously mentioned protocols. * api-change:``gamelift``: Increase string list limit from 10 to 100. * api-change:``budgets``: This change introduces DescribeBudgetNotificationsForAccount API which returns budget notifications for the specified account - from version 1.24.2 * api-change:``iam``: Documentation updates for AWS Identity and Access Management (IAM). * api-change:``redshift``: SDK release for Cross region datasharing and cost-control for cross region datasharing * api-change:``evidently``: Add support for filtering list of experiments and launches by status * api-change:``backup``: AWS Backup add new S3_BACKUP_OBJECT_FAILED and S3_RESTORE_OBJECT_FAILED event types in BackupVaultNotifications events list. - from version 1.24.1 * api-change:``ec2``: Documentation updates for EC2. * api-change:``budgets``: Adds support for auto-adjusting budgets, a new budget method alongside fixed and planned. Auto-adjusting budgets introduces new metadata to configure a budget limit baseline using a historical lookback average or current period forecast. * api-change:``ce``: AWS Cost Anomaly Detection now supports SNS FIFO topic subscribers. * api-change:``glue``: Support for optimistic locking in UpdateTable * api-change:``ssm``: Assorted ticket fixes and updates for AWS Systems Manager. ==== python-pyudev ==== - Skip some unreliable tests. ==== rubygem-formatador ==== Version update (1.1.0 -> 0.3.0) updated to version 0.3.0 see installed changelog.txt v0.3.0 06/17/21 =============== add travis badge to readme change readme to md fix markdown readme fix travis badge monkey-patch StringIO to try and fix jruby build override tty? for jruby build fix copyright statement use unicode.width instead of string.length remove unicode from requirements, use only if loaded display datum who's value is a FalseClass more colors with syntax-specific code/length limitations better code visualization in readme update readme remove broken rubinius build from CI fix length method to detect multibyte char width fix test for table with multi byte chars support multibyte characters update CI to 2.2.7, 2.3.4, and 2.4.1 drop rubyforge_project from gemspec and rakefile change github reference to https change readme.rdoc to readme.md in gemspec - Cleanup rpmlint warnings - updated to version 0.2.5 - updated to version 0.2.4 - initial package (version 0.2.3) ==== suitesparse ==== Subpackages: libamd2 libcamd2 libccolamd2 libcholmod3 libcolamd2 libsuitesparseconfig5 libumfpack5 - Fix bundled library versions: * libmongoose: 2.0.3 -> 2.0.4 * libspqr: 2.0.9 -> 2.1.0 * libumfpack: 5.7.8 -> 5.7.9 - Update to 5.11.0: * GraphBLAS v6.2.5: see GraphBLAS/Doc/ChangeLog for changes. Primary ones highlighted here: - v2.0 API: v6.x complies with the v2.0 C API of the GraphBLAS Spec. Note that GrB_wait, GrB_Info are now different than in the v1.3 C API Specification (and in v5.x of SuiteSparse:GraphBLAS). - GxB_Iterator: to iterate over rows/cols/entries of a matrix or vector - GxB_eWiseUnion: like eWiseAdd but with the op always applied - GxB_Matrix/Vector_sort: to sort the vectors of a matrix - better performance: for sparse-times-dense and dense-times-sparse, in particular; also other cases for GrB_mxm, up to 10x faster. - Apple Silicon: port @GrB to Octave 7 (thanks to Gabor Szarnyas) - added cpu_features: by Google - added LZ4/LZ4HC: compression library, http://www.lz4.org (BSD 2), v1.9.3, Copyright (c) 2011-2016, Yann Collet, All Rights Reserved. - iso-valued matrices and vectors: to exploit the common case of an unweighted graph - bug fixes: 4 bugs fixed since SuiteSparse 5.10.1 with GraphBLAS v5.0.5. 12 other bugs appeared in the interim but appeared in versions after v5.0.5 but fixed before ever affecting SuiteSparse itself. ==== supermin ==== - bsc#1187532 - virt-make-fs hangs forever detect-aarch64-kernel.patch ==== texlive ==== Subpackages: libkpathsea6 libsynctex2 - Add missed package splits for bsc#1196711 - Lower the official required perl version used for biber to get it build on SLE-15-SP4 - Drop the obsolete patches of the poppler support * fix-lua-poppler-22.01.patch * source-pdftoepdf-backport-from-2020.patch * c++17-does-not-allow-dynamic-exception-specifications.patch * fix-luatexdir-poppler-22.01.patch * do-not-use-streamSetPos.patch * fix-poppler-config-from-c.patch - Ignore patch source-dvipdfm-x.dif from bsc#1099563 as it is part of upstream since TeXLive 2018 - Backport TeXLive 2021, full python3 support and no poppler anymore - Add patches to build texlive with poppler 22.01.0 (boo#1195235, jsc#SLE-23488) * source-poppler0.83.0.patch * source-poppler0.86.0.patch * source-fix-const-poppler0.66.0.patch * source-fix-bool-poppler.patch * source-pdftoepdf-backport-from-2020.patch * fix-lua-poppler-22.01.patch * fix-luatexdir-poppler-22.01.patch * c++17-does-not-allow-dynamic-exception-specifications.patch * do-not-use-streamSetPos.patch * fix-poppler-config-from-c.patch - Also, as part of the changes to fix the build with poppler 22.01.0, use gcc9 and C++17. ==== texlive-specs-n ==== Version update (2021.187.2.005svn58637 -> 2021.189.2.005svn58637) - Backport TeXLive 2021, full python3 support and no poppler anymore - Add missed package splits for bsc#1196711 - Extend patch texlive-scripts_scripts.dif * boo#1193473 -- /etc/cron.daily/suse-texlive from texlive causes warnings OK make them silent ==== wavpack ==== - security update - added patches fix CVE-2021-44269 [bsc#1197020], out of bounds read in processing .wav file + wavpack-CVE-2021-44269.patch ==== whois ==== Version update (5.5.11 -> 5.5.12) - Update to 5.5.12: * Updated the .pro TLD server, which was totally broken. * Fixed the detection of Japanese locales using $LC_MESSAGES. * Implemented providing partial salt strings to mkpasswd. * Removed 2 new gTLDs which are no longer active. * Updated one or more translations. * Enabled full hardening in debian/rules. - Cleanup build requirements for SLE-11 ==== xdg-desktop-portal ==== Version update (1.12.1 -> 1.14.0) - Update to version 1.14.0: + Add a new "dynamic launcher" portal, which can install .desktop files and accompanying icons after user confirmation. + Rework handling of empty app IDs: In case an empty string app ID is stored in the permission store, this permission is now shared only by apps whose app ID couldn't be determined, rather than all unsandboxed apps. + Use libsystemd (when available) to try to determine the app ID of unsandboxed processes. This is useful since some portals otherwise can't be used by host apps. + Make x-d-p start on session start, which is needed for the dynamic launcher portal to handle rewriting launchers for apps that have been renamed. + Bring back the copy of Flatpak's icon-validator, which was dropped many releases ago. + Icon validation is now required for the notification and dynamic launcher portals (previously it was only done if the "flatpak-validate-icon" binary could be found). + document-portal: Move to the libfuse3 API + document-portal: Use renameat2 sys call + document-portal: Use mutex to fix concurrency bug + realtime: Fix error code paths + realtime: Fix MakeThreadHighPriorityWithPID method + screencast: Fix an error when restoring streams + ci: Various improvements + Documentation improvements + Updated translations. - Replace BuildRequires: pkgconfig(fuse) with pkgconfig(fuse3) since document-portal moved to use it. - Add BuildRequires: pkgconfig(libsystemd) and pkgconfig(gdk-pixbuf-2.0) which are now used. ==== yast2-installation ==== Version update (4.4.48 -> 4.4.49) - Run the YaST2-Second-Stage and YaST2-Firsboot services after purge-kernels to prevent a zypper lock error message (bsc#1196431). - 4.4.49 ==== yast2-packager ==== Version update (4.4.23 -> 4.4.26) - Read the products from libzypp in installed system, fixes crash during online migration (related to jsc#SLE-17309) - 4.4.26 - do not keep file handle to repo metadata open accidentally (bsc#1196061) - 4.4.25 - Properly set the repository alias for the Full medium add-ons (bsc#1193214) - 4.4.24